5.8″ x 4.225″ Multi Diameter Pigs
5.8″ x 4.225″ Multi – Diameter Pigs Propipe has completed the supply of 5.8″ x 4.225″ Multi-Diameter Pigs for FCG & Dewatering campaigns for a new pipeline project. The challenging pipeline system presented, included an internal diameter variance from 5.8″ (147.3mm) to 4.225″ (107mm)- which is a 28% change in ID at a very small […]
Fluid Retention & Flushing Plugs
Fluid Retention & Flushing Plugs Proplug has completed the supply of 12” & 6” fluid retention and flushing plugs to be used as part of the installation of a new pipeline. The fluid retention plugs were provided to allow flooding of jumper spools onshore before deployment subsea. During subsea deployment, the plugs allow equalisation of pressure […]
14″ x 10″ SMART Gauge
14″ x 10″ SMART Gauge Propipe has completed the supply of 14″ x 10″ Multi-Diameter Smart Gauging pigs for a pre-commissioning operation. The main pipeline was 14″ diameter, complete with reduced bore connectors at 10″ either side as well as heavy wall section (fortified zone). Traditional aluminium gauging would mean sizing the gauge plate to […]
12″ Pressurised Pipeline Spooling Plugs
12″ Pressurised Pipeline Spooling Plugs Proplug has completed the supply of 12″ plugs to be used as a part of a pressurised spooling operation. For spooling operations. TWO types of plug were utilised- High Pressure (HP) & Low Pressure (LP). The combination of the plugs allows the water in the pipeline to be retained and […]
